DIY Vintage Hanky Bunny Plushie

4-DSC_1745

3-DSC_2068

5-DSC_1740Hey everybody! Are you all so excited that spring is finally here? It’s still a little cool weather wise here, but I am starting to see some of my plants getting little buds. Soon everything will be green and pretty! Easter is also coming up very soon. So, this week I am sharing a bunch of Eastery springy things with you all to get an early start on the celebrations. Today I am going to show you how to make an upcycled stuffed easter bunny out of a vintage hanky and an old tee shirt. It’s pretty easy to whip up and full of personality!

Here’s What You Need:

*Vintage Hanky

*Striped Tee Shirt or Knit Fabric

*Interfacing, Medium Weight (a 1/4 yard should do)

*Coordinating Fabric Scraps

*Marking Pen

*Ruler

*Embroidery Floss and Needle

*Plastic Animal Nose (I got mine at JoAnns)

*Sewing Machine , thread and pins

*Stuffing (Polyfill)

*Ear Pattern

Pattern for the Ears:

Untitled-2

Instructions:

02-DSC_1691

First, iron your hanky and then cut and iron interfacing to the wrong side of the hanky. Fold it in half.

03-DSC_1692

Cut a rounded or egg shape at the top of the hanky, and trim the sides so they are straight and even.

04-DSC_1693

Cut one ear, interfacing for the ear, and ear lining piece for each ear from your fabric scraps. Also, cut two to two and a half inch strips for the legs and arms from your tee shirt. I made mine very long. I cut them all from the sleeves of a long sleeved tee shirt. Iron the interfacing to the wrong side of your ear lining pieces.

05-DSC_1699

Pin your ear and ear lining pieces together. Stitch all the way around leaving the bottom open. Clip the seam allowance at the top and turn right side out. Iron flat.

06-DSC_1700

Take a long knit strip and fold it in half lengthwise and so the right sides are facing each other. Stitch close to the edge all the way down. When you get about an inch away from the bottom curve the seam across the bottom for the ends. Do the same thing for all the other arms and leg.

08-DSC_1703

Using a chopstick or turner turn your leg and arm pieces right side out.

07-DSC_1701

Carefully iron all your leg and arm pieces. This is also a good time to trim them up to make sure the arms are the same length as well as the legs. You can also decide how long you want to make the arms and legs if you have not already and trim to your liking. You also need to embroider the bunny’s face. Draw in the eyes and mouth with a marking pen and then embroider over the lines with a simple back stitch. To add the nose clip a tiny hoe and insert the nose in at the top of the mouth then fasten the back to the front of the nose from the wrong side.

09-DSC_1704

Pin the arms and legs to the body where you like. I pinned my arms about half way down the sides and the legs about 3/4 of an inch from the corners at the bottom. Pin so that the limbs are pointed in toward the middle of the body.

10-DSC_1705

Stay stitch limbs in place. Stay stitch the ears too. Fold the ends of the bottom on each ear in toward the middle. Pin in place to the head where the lining fabric is facing the right side of the hanky. Ears should point toward the center. Pin in place and stitch.

11-DSC_1706

Once the limbs and ears are stitched in place, carefully fold everything in towards the middle of the bunny body.

12-DSC_1708

Lay the other body piece right side down on top and pin all the way around. Stitch all the way around the body leaving couple of inches open in the bottom for turning.

14-DSC_1710

Now,  clip corners and allowance where needed, and turn your bunny right side out. Stuff the bunny with fiber fill.

01-DSC_1712

To finish off your bunny, stitch the opening closed by hand with a whip stitch or ladder stitch.

1-DSC_2072

2-DSC_2069

6-DSC_1738I just adore my little bunny! This was one of my favorite hankies, and now I like it even better. She is so sweet! I think such a sweet bunny would be a perfect addition to an Easter basket for your little ones! You can customize it too with how you stitch the face or the length and thickness of the legs and arms. I hope some of you guys will give it a try sometime! I think my bunny took me a little over an hour, and she was super fun to make! I’ll be back very soon with another fun Easter DIY. Until then…

Happy Crafting!

Related Posts Plugin for WordPress, Blogger...

10 Responses

  1. glitteronmyface

    Ashley this bunny is so cute! You are so talented and I love to see all the creative things you come up with. I wish I was clever enough to make a bunny of my own!

    • My So Called Crafty Life

      Thank you so much Darling! You made my week 🙂 It was a lot of fun to make, and I’m sure if you tried your hand at a bunny it would be precious too 🙂

  2. Bunny Plushie | pinfollow.me feeds

    […] Repin Like I think that the facial expression and super-long stripy legs on this bunny toy inject a load of personality into it, which really brings it to life. Find the tutorial here.  […]

  3. maidenjane

    This is adorable in its simplicity and cuteness! I can see making this out of a special memory hanky or some other material.