DIY Embroidered Pallet Wood Art

8-DSC_0020 (2)

6-DSC_0034 (2)

4-DSC_0037 (2)

2-DSC_0047 (2)Pallets are one of my favorite items to repurpose! The wood has a cool rustic look, and you can usually find them for free. I have been wanting to try to embroider some wood for a while now. My hubby scored some pallets from work the other day, and I knew exactly what to do with them. This DIY is fun and simple. As with anything that is embroidered, it takes a little time, but it’s fun work. 

Here’s What You Need:

*Piece of Wood from a Pallet

*Wording you like printed out to size

*Punch Awl

*Painters Tape

*Drill or Drill Press and a 1/8″ drill bit

*Yarn

*Large Yarn Needle

*Sawtooth hanger hardware and ruler

*Circular saw or handsaw

Instructions:

DSC_0001_800x371

The first thing you need to do is print out your wording. Find a font you like and resize it until the height and width of the font are to fit your board. My pallet piece was a little over three and a half inches tall so I made sure my font was a little smaller than three inches. Once you have your print out, tape the paper down to the pallet wood board making sure your wording is centered.

DSC_0003_455x600

DSC_0005_526x600

Take your punch awl and punch holes into the wood through the paper every half an inch(a little less on curves), all around your wording.  Punch every letter until you have the whole thing punched.

DSC_0007_489x600

Remove the paper from the wood. Fit your drill or drill press with an eighth inch drill bit.

DSC_0010_440x600

DSC_0011_800x489

Next, carefully drill through your wood where each punch is marking the letters. Be careful. If you are having a hard time seeing the punch marks, you can mark them with a marker to help you see them better. Drill through every punch mark on every letter until you get to the end. Once all the holes are drilled, clean off the wood so there isn’t any dust that will dirty your yarn.

DSC_0013_460x600

DSC_0014 (2)_535x600

Cut a long piece of yarn and thread one end through the needle. Double knot the end of the yarn. Now bring the needle up through the bottom of the wood through the first hole in the first letter.

DSC_0015 (2)_599x600

DSC_0016 (2)_559x600

DSC_0017 (2)_684x600

DSC_0018 (2)_800x599Embroider the letter using a back stitch. Stitch all the wording. Knot the yarn at the end when you have finished stitching close to the wood. Snip excess threads. If you’d like to hang your pallet art, you will need to attach a sawtooth hanger to the center top on the back of the wood. 

7-DSC_0022 (2)

1-DSC_0030 (2)

5-DSC_0035 (2)

3-DSC_0036 (2)I LOVE my little embroidered pallet wood sign! It is cute and rustic and looks great in my kitchen! Embroidering on wood is a blast! This one was a test for me. I am wanting to make a larger one soon to hang in the living room, and will definitely share when I make it. I hope some of you will give this one a try, you’ll have so much fun! I’ll be back next week with another fun and easy DIY. Until then…

Happy Crafting!

Related Posts Plugin for WordPress, Blogger...

16 Responses

  1. Mary Jo

    , Interesting, clever, good re-purposing. Like everything about it
    Nice work. And thanr sharing the idea!!.