DIY Linen Phone Sleeve and My New Shutterfly Case

Hello everyone! Happy Tuesday! So, today I am going to share with you which of my Shutterfly phone case designs I went with, as well as an easy tutorial on how to make a protective sleeve for your phone. I was so excited when I got my new Shutterfly phone case this past week! It is just so ME! I decided to go with the simple chalkboard design with my #1 buddy Beaureguard. The little banner at the bottom means “the little pleasures” en Francais, and it comes from the saying “La vie est faite de petits bonheurs” or “Life is made of little pleasures” and I believe bonheur can also mean happiness or what makes one happy. And I’m sure I speak for most of us when I say my dog makes me happy!

My mom is a photographer, so I am no stranger to photo gifts you can get from a lab. Most of the time the quality in my opinion can be a bit lacking. I have to say though, I am very impressed with this case! The printing quality is fantastic, and it seems to be durable and nicely protective. It is a nice thick polycarbonate plastic that snaps on. When I first bought my phone, I got a designer case which was plastic and within a week the design was scratched off of it. For the last year I have been trying to find a case that was both somewhat protective and cute. This one totally does the trick!

Since I tend to wear a lot of skirts in the spring and summer, which means no pockets, I have made this little padded phone sleeve to safely carry my phone on skirt days. This sleeve is made for my iphone 4, but you can change-up the measurements to suit your phone’s dimensions. This is a really fast and easy project! It is a great way to use up scraps too.

Here’s What You Need:

*Scrap fabric or around 1/8 of a yard of fabric

*Scrap Batting or 1/8 of a yard

*Leather Lacing

*Button

*Thread and Needle

Instructions:

The first thing you need to do is cut your pieces. I made mine for my iphone 4. If you have an iphone 5 you may want to make it about an inch longer. I measured my phone and gave it a couple of extra inches around for seam allowance and wiggle room. So, cut two pieces for the outside front and back and two pieces for the lining at 4.5×7″. Cut two pieces of the batting at 4.5X7″. If you’d like a little pocket, cut a piece of your lining fabric to be 4.5×5″. I added a patch to the front piece of my sleeve. If you are adding any patch or embellishment sew it on now. Next, lay the outside pieces front and back on the front and back pieces of your batting face up. Stitch the batting to the fabric with a 1/4″ seam allowance. Now, take your pocket piece and turn it under 1/8″ and press. Turn the top under again 1/2″ and stitch down close to the edge where you turned it under on the wrong side. Now you are ready to stitch together your sleeve. Place the pocket piece on the front of your front sleeve face up and sandwich it in between the front and back pieces. The front and back should be right sides together. Stitch all the way around the three sides with a half-inch seam allowance leaving the top open. Stitch the lining pieces together the same way, making sure that the right sides are together. Clip corners and trim the seam allowance down a little on both. Turn the front piece right side out. Fold a small piece of leather lacing in half and stitch down to the pocket side of your outside sleeve. Now, shimmy your outside sleeve into the lining so that right sides are facing. Carefully stitch around the top with a quarter-inch seam allowance leaving an inch or so for turning. Now, pull your outside and lining out through the hole in the top. Press. Stuff the lining into the outer sleeve. Now top stitch around the top about an eighth inch away from the edge. Pull the loop over the top and mark where to put your button. Hand stitch the button on the back side. And that’s it. Pretty easy eh?

I absolutely ADORE my new phone case and padded sleeve! I love that it is a perfect size for scraps. I paired up natural linen with a scrap from an old vintage cutter tablecloth, and a retro quilting fabric for the pocket and the lining. This little sleeve is so versatile, you can really customize it to your style and taste by the patterns and fabric choices you use. This sleeve fits perfectly in the large pocket of my purse. In hind sight I wish I had sewn a loop of ribbon in the side seam so I could attach a clip to it and clip in on the handle of my bag. Will definitely have to try that next time. I hope I have inspired some of you to try out this little phone sleeve. You will love it! And definitely go check out Shutterfly’s IPhone cases Here. They are so fun and easy to customize. There are plenty of design options. They are on sale at 20% off right now too, so you can snag one for under $30. Pretty cool! I’ll be back Thursday with another fun DIY. Until then…

Happy Crafting!

 

*Disclosure: I was given a promotional code for a phone case from Shutterfly. No other compensation was given. All opinions are 100% my own. No foolin’, this phone case is awesome!

Related Posts Plugin for WordPress, Blogger...

3 Responses

    • My So Called Crafty Life

      Hi Helen! If it was me, I would sew fabric loops on the side seams near the top with some small d rings, then stitch a strap with little hooks so that you can take the strap off or use it. You could also just stitch in a strap when you sew the outside and lining together at the top. You’d have to stuff the strap down into the pouch and pin it between the lining and outer fabric so the ends were flush with the top. Hope this helps 🙂 Have fun sewing!